Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Figure B.1 shows the method roles around the pressure source, measurement point, controlled test volume, connector under test and reference connector. Use it to discuss the configuration; it is not a product photograph or a controlled manufacturing drawing.
Click the drawing to inspect it at a larger size. Request the selected KingPo equipment configuration separately.
| Standard / Figure | Confirm applicable standard and product family |
|---|---|
| Product type | test equipment |
| Connector family | leakage tester family |
| RFQ inputs | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Share the accessory, fixture, certificate and shipping needs so KingPo can identify the right product scope.
Use the method path to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
Send the Annex or method, connector sample, fixture interface, pressure or vacuum route, report expectation and certificate need together.
Prepare equipment RFQDatasheets, operating documents and report examples should match the selected equipment configuration and order scope.
Request documentsChoose this product path when the inquiry is specifically about ISO 80369-20 Annex B leakage by pressure decay. The RFQ should identify the connector under test, the required mating reference connector, test volume, fixture route and result record.
The apparatus relationship includes the connector under test, an appropriate reference connector, a pressure source, pressure measurement, a controlled test volume and the sealing or valve arrangement needed by the selected setup. Product selection should therefore include the fixture and mating-side discussion, not only the instrument.
Annex B pressure-decay is not the same route as Annex C positive-pressure liquid leakage or Annex D subatmospheric-pressure air leakage. KingPo keeps those method relationships visible so the equipment channel is quoted against the actual test request.
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productProvide the connector sample, mating reference connector or counterpart, required test volume, fixture interface, expected pressure-decay record and any report or certificate need.
No. Annex B is the pressure-decay route. Subatmospheric-pressure air leakage follows the Annex D equipment path.
Continue from this page into the related standard, product family, requirement or test method before preparing the RFQ.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
