Medical Connector Testing Solutions
Reference connectors, gauges, fixtures, instruments and laboratory capability planning for ISO / IEC 80369 and related medical connector standards.
Plan the reference interface, fixture, instrument channel, calibration and document route as one test setup.
Start with the question the engineer is trying to answer
A connector testing inquiry usually begins from a product, a standard, a method or a complete lab capability. CHINATIC keeps those routes connected instead of forcing buyers through one catalog path.
Product route
Start with the physical interface: reference connector, gauge, fixture, instrument or complete capability.
- Connector side
- Figure or family
- Mating interface
- Document scope
Standard route
Use the application standard to identify the connector family, then connect it to ISO 80369-20 methods.
- Application part
- Related family
- Common method
- Legacy terms
Method route
Choose the measured condition before choosing equipment: pressure, leakage, force, torque or dimensions.
- DUT
- Fixture
- Instrument channel
- Report need
Laboratory route
Plan a repeatable capability with products, calibration, documents and service support grouped together.
- Coverage
- Accessories
- Calibration
- RFQ package
Connector testing products with real selection paths
Start from a physical product family, then narrow by standard, figure, method, fixture and documentation requirement.
Open Product Catalog
ISO 80369-7ISO 80369-7 Figure C.1 Female Reference Luer Lock Connector
Reference connector for Luer lock verification
View Product
ISO 80369-7 / ISO 594 searchISO 80369 Luer Gauge Set
Gauge set for dimensional and fit checks
View ProductISO 80369-20 method routeSubatmospheric Air Leakage Tester
Vacuum leakage instrument
View Product
ISO 80369 setup supportConnector Assembly Device
Assembly and setup support
View ProductApplication standards connect to product families and common test methods
The standard route helps buyers move from application area to reference connector, gauge, fixture and equipment without losing the ISO 80369-20 method relationship.
Luer, enteral, respiratory, neuraxial, limb cuff and reservoir connector routes.
Start from the device context
Intravascular & Hypodermic
Luer connector testing route for ISO 80369-7 reference connectors, gauges, leakage tests and fixtures.
ISO 80369-3Enteral Feeding
Enteral connector verification path for standard selection, mating interface review and method planning.
ISO 80369-2Respiratory
Respiratory connector testing entry for application standards, related connection context and verification products.
ISO 80369-6Neuraxial
Neural application connector route for connector family, test method and product selection.
Methods are selected by measured behavior, not by instrument name
Buyers often know the standard or connector first. The method view translates that requirement into DUT, mating interface, fixture, instrument channel and report expectations.
Leakage and pressure
Checks whether the connected interface maintains the required sealing behavior under the selected pressure or vacuum route.
Mechanical retention
Checks whether the connector interface remains assembled or separates under a defined mechanical action.
Dimensional and material checks
Supports inspection of dimensional fit and material behavior before or alongside functional testing.
Build an ISO 80369 connector testing laboratory
A complete capability is not just a tester. It includes defined mating interfaces, gauges, fixtures, measurement channels, calibration questions and the documents needed by QA, engineering and procurement.
Plan Lab SolutionReal product paths remain visible after the technical route is clear
Leakage testingPressure / Liquid Leakage Test Setup
Leakage and pressure test setup
View routeSubatmospheric air leakageSubatmospheric Air Leakage Tester
Vacuum leakage instrument
View route
Axial separationAxial Load / Separation Test Setup
Force and separation setup
View route
Unscrewing torqueTorque / Unscrewing Test Equipment
Torque measurement setup
View routeAssembly / fixture preparationAssembly Device
Fixture and assembly support
View route
Leakage, force, torque and dimensional routesISO 80369 Complete Test System
Multi-method laboratory configuration
View routeTesting scenarios for engineering and QA teams
Luer connector verification setup
Select reference connectors, gauges and leakage testing equipment for ISO 80369-7 Luer connector verification.
Reference connector route, Luer gauge path, leakage equipment, fixture review and calibration or verification options.
Quality or compliance laboratoryLeakage testing equipment selection
Match a leakage method to the connector side, mating interface and pressure channel.
Leakage method page, subatmospheric leakage equipment, fixtures and RFQ checklist.
R&D, QA or third-party laboratoryNew connector testing lab planning
Plan a broader capability without turning a typical configuration into a fixed SKU.
Typical configuration may include reference connectors, gauges, leakage equipment, force or torque equipment, fixtures and documentation support.
Prepare the standard, figure, method and document requirement
ISO 80369 Testing Laboratory Solution
Typical capability may include reference connectors, gauges, fixtures, leakage equipment, force or torque equipment, documents and service support.
Device makerMedical Device Manufacturer Solution
Support design verification, supplier comparison and production quality checks for connector-bearing devices.
Verification labConnector Verification Laboratory Setup
Plan a repeatable verification bench with reference connectors, gauges, equipment, fixtures and documentation.
Send your connector, standard, figure, method or equipment requirement
CHINATIC can review the application, product family, fixture need, documentation expectation and service scope before quotation.