Sample side
The C.5 connector provides the female reference side. The male Luer sample is inserted into this female slip interface during the selected test setup.
ISO 80369-7 reference connector
ISO 80369-7 Figure C.5 Female Reference Luer Slip Connector
Female reference Luer slip connector for testing male Luer connectors for leakage, axial separation, stress cracking and non-interconnectable characteristics.
FemaleLuer slipTests male Luer connectorsReference connector
Direct product answer
C.5 is the female Luer slip reference connector for male Luer connector testing. It is not a gauge.
ISO 80369-7 Figure C.5 is the female reference Luer slip connector used as the controlled mating side for male Luer connector testing. It supports leakage, axial-load separation, stress cracking and non-interconnectable-characteristics evaluation. It is a reference connector, not a Luer gauge or test machine.
Key specs
StandardISO 80369-7
FigureC.5
Product typeFemale reference connector
InterfaceLuer slip
Tested sampleMale Luer connector
Selection logic
Choose Figure C.5 when evaluating a male Luer slip connector
Figure C.5 provides the female reference Luer slip interface used to evaluate a mating male Luer connector. Select this connector when the tested sample is male and the required connection is Luer slip. For female samples or Luer lock interfaces, use the corresponding reference connector defined by the applicable Figure.
Slip or lock
Luer slip relies on axial push-fit engagement. Luer lock uses a threaded locking relationship and may require different reference connectors or torque-related checks.
Connector or gauge
C.5 is used as the mating reference connector in a functional test setup. A Luer gauge is a different tool for dimensional or fit checking.
Technical specifications
| Standard | ISO 80369-7 |
|---|---|
| Figure | C.5 |
| Model | ISO 80369-7 C.5 |
| Product type | Female reference connector |
| Interface | Luer slip |
| Tested sample | Male Luer connector |
| Material | 440C stainless steel |
| Hardness | Rockwell hardness C58–C60 |
| Critical surface roughness | Ra ≤ 0.8 μm |
| Hexagon | 10 mm |
| Pipe diameter | Ø4 mm |
Engineering reference
Technical Drawing and Dimensions
Use the public Figure C.5 reference drawing to check the Figure identity, connector side, slip interface and dimensional callouts before requesting a quotation. Formal controlled manufacturing drawings and order-specific documentation can be confirmed during order review.
Public reference technical drawing for Figure identity and dimensional review, not product photo.
Setup fit
How It Fits into the Test Setup
Use the C.5 connector as the female Luer slip reference side, then match the assembled connection with the method and equipment required by the test plan.
- Confirm the sample is a male Luer connector.
- Confirm the method requires ISO 80369-7 Figure C.5.
- Assemble the sample with the C.5 female Luer slip reference connector.
- Choose the required method path, then use the assembled connection with the matching equipment or fixture.
- Request related fixtures, gauges, equipment or a complete C.1-C.6 set only if your test plan needs them.
Method selection
C.5 role by test path
| Test path | C.5 role | Typical additional equipment |
|---|---|---|
| Leakage testing | Controlled female mating reference | Pressure or liquid leakage equipment and fixture |
| Axial-load separation | Female mating connector in the assembled test connection | Axial-load fixture and force measurement system |
| Stress cracking | Connector used in the specified assembled condition | Stress-cracking fixture and controlled exposure setup |
Before you request a quote
Information to Include with Your Request
If you are not sure whether your connector is male or female, or whether the setup requires slip or lock, include a sample drawing or photo with the inquiry.
FAQ
Questions Buyers Ask Before Ordering
Is Figure C.5 the right connector for my sample?
Use C.5 when the sample is a male Luer connector and the test setup requires a female Luer slip reference connector.
Is Figure C.5 a gauge?
No. It is a reference connector. Luer gauges are separate tools used for dimensional or fit checking.
How is C.5 different from Luer lock reference connectors?
C.5 is a Luer slip reference connector. It does not use the threaded locking relationship of a Luer lock connector.
Can I order C.5 as a single item?
Yes. You can request the individual Figure C.5 connector, or ask KingPo to quote it with related connectors, gauges, fixtures, equipment or a complete ISO 80369-7 set.
What if I do not know which Figure I need?
Send a sample drawing or photo, connector side, intended test method and any standard/Figure reference from your test plan. KingPo can help match the correct Figure item before quoting.