Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Product image available on request.
| Standard / Figure | Confirm applicable standard and product family |
|---|---|
| Product type | test equipment |
| Connector family | torque tester family |
| RFQ inputs | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Share the accessory, fixture, certificate and shipping needs so KingPo can identify the right product scope.
Use the method path to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
Send the Annex or method, connector sample, fixture interface, pressure or vacuum route, report expectation and certificate need together.
Prepare equipment RFQDatasheets, operating documents and report examples should match the selected equipment configuration and order scope.
Request documentsISO 80369 Luer Lock Torque Tester is not the main measurement instrument. Its role is restraining and aligning the connector while a lock or unscrewing torque route is applied. Buyers should quote it together with the sample connector, mating side, equipment channel and method route when the fixture is part of the test setup.
Fixture selection depends on the connector family, sample geometry, mating counterpart, direction of force or torque, and whether the laboratory needs repeated positioning or one-time engineering review. Share drawings or sample photos when the holding method is unclear.
Related standards: ISO 80369-7, ISO-80369-20. Related methods: unscrewing-torque. The public page should describe the fixture function and RFQ inputs, while final dimensions, adapters and acceptance details stay tied to KingPo engineering confirmation for the selected sample.
Buying the fixture with the relevant equipment and reference connectors reduces setup mismatch risk. It also gives the lab a clearer document request path for operating instructions, certificate wording, adapter lists and packing scope.
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productUsually no. Fixtures and assembly devices support holding, alignment, assembly force or torque application around the main ISO 80369 test method.
It must match the connector family, sample geometry, mating counterpart, load or torque direction and the equipment interface used in the test setup.
Provide sample drawings or photos, connector side, intended test method, equipment channel, adapter need, quantity and documentation expectation.
Continue from this page into the related standard, product family, requirement or test method before preparing the RFQ.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
