Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Product image available on request.
| Standard / Figure | Confirm applicable standard and product family |
|---|---|
| Product type | fixture or accessory |
| Connector family | fixture system family |
| RFQ inputs | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Share the accessory, fixture, certificate and shipping needs so KingPo can identify the right product scope.
Use the method path to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
Fixture requests should include sample drawings or photos, mating side, load or torque direction and the equipment interface.
Prepare fixture RFQThe fixture may depend on leakage, axial-load, torque, overriding or stress-cracking workflow details, so it should not be quoted as an isolated accessory.
Ask for adapter lists, operating notes, packing scope and certificate wording when the fixture will be used in a controlled laboratory setup.
Request setup documentsISO 80369 Stress Cracking Fixture System is not the main measurement instrument. Its role is holding connector samples in the required assembled or exposed condition before follow-up inspection. Buyers should quote it together with the sample connector, mating side, equipment channel and method route when the fixture is part of the test setup.
Fixture selection depends on the connector family, sample geometry, mating counterpart, direction of force or torque, and whether the laboratory needs repeated positioning or one-time engineering review. Share drawings or sample photos when the holding method is unclear.
Related standards: ISO-80369-20. Related methods: stress-cracking. The public page should describe the fixture function and RFQ inputs, while final dimensions, adapters and acceptance details stay tied to KingPo engineering confirmation for the selected sample.
Buying the fixture with the relevant equipment and reference connectors reduces setup mismatch risk. It also gives the lab a clearer document request path for operating instructions, certificate wording, adapter lists and packing scope.
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productUsually no. Fixtures and assembly devices support holding, alignment, assembly force or torque application around the main ISO 80369 test method.
It must match the connector family, sample geometry, mating counterpart, load or torque direction and the equipment interface used in the test setup.
Provide sample drawings or photos, connector side, intended test method, equipment channel, adapter need, quantity and documentation expectation.
Continue from this page into the related standard, product family, requirement or test method before preparing the RFQ.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
