KingPoMedical Connector Testing
Request a Quote
Products

Full medical connector testing catalog

Browse 57 products across reference connectors, gauges, equipment, fixtures and configurable systems. Compare each item by standard, Figure, connector side, test method and documentation requirement.

Reference ConnectorsGaugesTest Equipment
KingPo ISO 80369 product catalog equipment, gauges, fixtures and reference connectors
Product range

Browse 57 products across reference connectors, gauges, fixtures and test equipment. Exact product images and documents are available for confirmed configurations.

Choose by buying task

The catalog is organized around the product role in the test setup

A buyer usually does not need every item first. They need the correct starting role: a mating interface, an inspection gauge, or the equipment chain for a measured result.

I need a controlled mating interface

Reference connector

Match standard part, figure, side and slip/lock condition before selecting fixtures or instruments.

I need to check Luer fit or dimensions

Gauge or complete gauge set

Confirm the sample side first: male samples are checked with ring gauges; female samples are checked with plug gauges.

I need leakage, force or torque results

Method equipment plus fixture

Start from the measured behavior, then define DUT, reference connector, fixture and report output.

Product categories

Choose the product role required by your test setup

43 products

Reference Connectors

Figure-defined reference connectors for ISO 80369-2, -3, IEC 80369-5, ISO 80369-6 and ISO 80369-7.

3 products

Gauges & Gauge Sets

Luer gauges, ring gauges, plug gauges and gauge-set options for dimensional and fit verification.

8 products

Test Equipment

Leakage, subatmospheric air leakage, axial-load, torque, overriding and related test equipment.

3 products

Fixtures & Accessories

Holding, assembly, torque, conditioning and method-support fixtures used with connector tests.

0 products

Complete Test Systems

Configurable system paths that combine products, fixtures, equipment, documents and service support.

Featured products

Testing products and supporting equipment

ISO 80369 Luer Lock Torque Tester product visualtest equipment | ISO 80369 7 / ISO 80369 20

ISO 80369 Luer Lock Torque Tester

Provides controlled torque application for assembly, unscrewing and overriding-related connector evaluation.

View productISO 80369-20 Annex B Liquid Leakage Tester product visualtest equipment | ISO 80369 20

ISO 80369-20 Annex B Liquid Leakage Tester

KingPo Annex B liquid leakage tester configuration for pressure-decay leakage setup planning, with product imagery, reference-connector context and RFQ preparation.

View productISO 80369-20 Annex B/C Pressure and Liquid Leakage Tester product visualtest equipment | ISO 80369 20

ISO 80369-20 Annex B/C Pressure and Liquid Leakage Tester

KingPo supplied documentation identifies this tester for ISO 80369-20 Annex B pressure leakage and Annex C positive-pressure liquid leakage workflows.

View productISO 80369-20 Annex D Subatmospheric Air Leakage Tester product visualtest equipment | ISO 80369 20

ISO 80369-20 Annex D Subatmospheric Air Leakage Tester

KingPo supplied documentation identifies this tester for ISO 80369-20 Annex D subatmospheric-pressure air leakage workflows.

View productISO 80369-20 Annex F Axial Load Separation Tester product visualtest equipment | ISO 80369 20

ISO 80369-20 Annex F Axial Load Separation Tester

KingPo supplied documentation identifies this equipment for ISO 80369-20 Annex F resistance to separation from axial load, including force, displacement, software and report workflow context.

View productISO 80369-20 Connector Assembly Device product visualfixture or accessory | ISO 80369 20 / ISO 80369 7

ISO 80369-20 Connector Assembly Device

KingPo supplied documentation identifies the Connector Assembly Device as the force-and-torque assembly device used when connecting a reference connector with a test sample before selected ISO 80369-20 workflows.

View productConnector Unscrewing Torque Test Fixture product visualfixture or accessory | ISO 80369 20

Connector Unscrewing Torque Test Fixture

Provides controlled torque application for assembly, unscrewing and overriding-related connector evaluation.

View productEnteral Connector Fixture Kit product visualfixture or accessory | ISO 80369 3

Enteral Connector Fixture Kit

Fixture configuration page for aligning connector support, test method and equipment interface before quotation.

View product
Browse by standard

Every product selection connects back to a standard

20 products

ISO 80369 2

Includes reference connector, reference connector component.

6 products

ISO 80369 3

Includes reference connector, fixture or accessory.

6 products

IEC 80369-5

Includes bundle, reference connector, reference connector component.

6 products

ISO 80369 6

Includes bundle, reference connector.

11 products

ISO 80369 7

Includes test equipment, fixture or accessory, gauge, reference connector.

10 products

ISO 80369 20

Includes test equipment, fixture or accessory.

Complete catalog

Complete product catalog

Browse by product role, then open a product to confirm the standard, Figure, mating side and quotation requirements.

43 products

Reference Connectors

View category
ISO 80369 Neuraxial Reference Connector Setbundle | ISO 80369 6ISO 80369 Reference Connector Setbundle | IEC 80369-5ISO 80369-2 Figure B.1 R1 Cone Small-Bore ConnectorFigure B.1 | reference connector | ISO 80369 2ISO 80369-2 Figure B.2 R1 Socket Small-Bore ConnectorFigure B.2 | reference connector | ISO 80369 2ISO 80369-2 Figure B.3 R2 Cone Small-Bore ConnectorFigure B.3 | reference connector | ISO 80369 2ISO 80369-2 Figure B.4 R2 Socket Small-Bore ConnectorFigure B.4 | reference connector | ISO 80369 2ISO 80369-2 Figure B.5 R1 Small-Bore Connector AssemblyFigure B.5 | reference connector | ISO 80369 2ISO 80369-2 Figure B.6 R2 Small-Bore Connector AssemblyFigure B.6 | reference connector | ISO 80369 2ISO 80369-2 Figure C.1 R1 Socket Reference ConnectorFigure C.1 | reference connector | ISO 80369 2ISO 80369-2 Figure C.10 R2 Cone Reference Lock Connector AssemblyFigure C.10 | reference connector | ISO 80369 2ISO 80369-2 Figure C.11 R2 Axial-Load Cone Reference Connector AssemblyFigure C.11 | reference connector | ISO 80369 2ISO 80369-2 Figure C.12 R2 Cone Taper InsertFigure C.12 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.13 R2 Cone Reference Connector BodyFigure C.13 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.14 R2 Axial-Load Cone Reference Connector BodyFigure C.14 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.2 R1 Axial-Load Socket Reference ConnectorFigure C.2 | reference connector | ISO 80369 2ISO 80369-2 Figure C.3 R1 Cone Reference Connector AssemblyFigure C.3 | reference connector | ISO 80369 2ISO 80369-2 Figure C.4 R1 Axial-Load Cone Reference Connector AssemblyFigure C.4 | reference connector | ISO 80369 2ISO 80369-2 Figure C.5 R1 Cone Taper InsertFigure C.5 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.6 R1 Cone Reference Connector BodyFigure C.6 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.7 R1 Axial-Load Cone Reference Connector BodyFigure C.7 | reference connector component | ISO 80369 2ISO 80369-2 Figure C.8 R2 Socket Reference Lock ConnectorFigure C.8 | reference connector | ISO 80369 2ISO 80369-2 Figure C.9 R2 Axial-Load Socket Reference ConnectorFigure C.9 | reference connector | ISO 80369 2ISO 80369-3 Enteral Reference Connectorreference connector | ISO 80369 3ISO 80369-3 Figure C.1 Female Enteral Reference ConnectorFigure C.1 | reference connector | ISO 80369 3ISO 80369-3 Figure C.2 Female Axial-Load Enteral Reference ConnectorFigure C.2 | reference connector | ISO 80369 3ISO 80369-3 Figure C.3 Male Enteral Reference ConnectorFigure C.3 | reference connector | ISO 80369 3ISO 80369-3 Figure C.4 Male Axial-Load Enteral Reference ConnectorFigure C.4 | reference connector | ISO 80369 3ISO 80369-6 Figure C.1 Female Neuraxial Reference Lock ConnectorFigure C.1 | reference connector | ISO 80369 6ISO 80369-6 Figure C.2 Male Neuraxial Reference Slip ConnectorFigure C.2 | reference connector | ISO 80369 6ISO 80369-6 Figure C.3 Female Axial-Load Neuraxial Reference ConnectorFigure C.3 | reference connector | ISO 80369 6ISO 80369-6 Figure C.4 Male Neuraxial Reference Lock ConnectorFigure C.4 | reference connector | ISO 80369 6ISO 80369-6 Figure C.5 Male Axial-Load Neuraxial Reference ConnectorFigure C.5 | reference connector | ISO 80369 6ISO 80369-7 Figure C.1 Female Reference Luer Lock ConnectorFigure C.1 | reference connector | ISO 80369 7ISO 80369-7 Figure C.2 Male Reference Luer Slip ConnectorFigure C.2 | reference connector | ISO 80369 7ISO 80369-7 Figure C.3 Female Axial-Load Reference Luer Lock ConnectorFigure C.3 | reference connector | ISO 80369 7ISO 80369-7 Figure C.4 Male Reference Luer Lock ConnectorFigure C.4 | reference connector | ISO 80369 7ISO 80369-7 Figure C.5 Female Reference Luer Slip ConnectorFigure C.5 | reference connector | ISO 80369 7ISO 80369-7 Figure C.6 Male Axial-Load Reference Luer Lock ConnectorFigure C.6 | reference connector | ISO 80369 7ISO/IEC 80369-5 Figure C.1 Female-Cone Reference Connector AssemblyFigure C.1 | reference connector | IEC 80369-5ISO/IEC 80369-5 Figure C.2 Male-Cone Reference Connector AssemblyFigure C.2 | reference connector | IEC 80369-5ISO/IEC 80369-5 Figure C.3 Reference Connector SleeveFigure C.3 | reference connector component | IEC 80369-5ISO/IEC 80369-5 Figure C.4 Female-Cone Reference Connector InsertFigure C.4 | reference connector component | IEC 80369-5ISO/IEC 80369-5 Figure C.5 Male-Cone Reference Connector InsertFigure C.5 | reference connector component | IEC 80369-5
3 products

Gauges & Gauge Sets

View category
Female Luer Lock Gauge Setgauge | ISO 80369 7ISO 80369-7 Complete Luer Gauge Setgauge | ISO 80369 7Male Luer Gauge Setgauge | ISO 80369 7
8 products

Test Equipment

View category
ISO 80369 Luer Lock Torque Testertest equipment | ISO 80369 7 / ISO 80369 20ISO 80369 Multi-Mode Leakage Test Stationtest equipment | ISO 80369 20ISO 80369 Overriding Resistance Testertest equipment | ISO 80369 20ISO 80369-20 Annex B Liquid Leakage Testertest equipment | ISO 80369 20ISO 80369-20 Annex B/C Pressure and Liquid Leakage Testertest equipment | ISO 80369 20ISO 80369-20 Annex D Subatmospheric Air Leakage Testertest equipment | ISO 80369 20ISO 80369-20 Annex F Axial Load Separation Testertest equipment | ISO 80369 20ISO 80369-20 Connector Assembly Devicefixture or accessory | ISO 80369 20 / ISO 80369 7
3 products

Fixtures & Accessories

View category
Connector Unscrewing Torque Test Fixturefixture or accessory | ISO 80369 20Enteral Connector Fixture Kitfixture or accessory | ISO 80369 3ISO 80369 Stress Cracking Fixture Systemfixture or accessory | ISO 80369 20