ISO 80369-2 Figure C.13 R2 Cone Reference Connector Body identifies the male R2 cone body role for Figure C.13. Use it to confirm mating connector side, lock interface, related test method, calibration scope and RFQ information before quotation.
| Standard | ISO 80369-2:2024 |
|---|---|
| Figure | C.13 |
| Product type | reference connector component |
| Gender | male |
A useful inquiry includes the product, standard part, connector side, Figure or Annex when known, test method, quantity, fixture need, document request and calibration expectation.
Prepare RFQUse this drawing to identify the Figure, connector side, mating relationship and dimensional reference before quotation. It is an engineering reference, not the main product photo.
| Standard | 2024 |
|---|---|
| Figure | C.13 |
| Drawing role | Public reference technical drawing |
| Product photo | Available on request |
| Controlled drawing | Available with the selected order scope |
| Official designation | Cone reference connector for testing R2 socket connectors for leakage, separation from unscrewing, stress cracking and non-interconnectable characteristics |
|---|---|
| Material | Use KingPo engineering record or datasheet for final material |
| Dimensions | Controlled by source standard; final KingPo implementation supplied in approved documents |
| Tolerances | Controlled by source standard; final KingPo implementation supplied in approved documents |
| Certificate option | Discuss certificate wording for the requested product scope |
| Standard / Figure | Figure C.13 |
|---|---|
| Product type | reference connector component |
| Connector family | reference connector family |
| Information for quotation | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Include the mating connector, required test method, fixture need, quantity, calibration scope and documentation expectation when asking for this Figure item.
Datasheets, manuals, controlled drawings, report examples, calibration records and certificate wording should match the selected Figure, Annex, fixture, instrument channel and order configuration.
| Product image | Request the exact product photo for the selected configuration |
|---|---|
| Technical drawing | Public reference drawing shown on this page |
| Datasheet | Confirmed during quotation |
| Request types | Controlled drawing, datasheet and certificate wording request |
| Calibration | pending_confirmation |
| Certificate | pending_confirmation |
Use the test method to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
ISO 80369-2 Figure C.13 R2 Cone Reference Connector Body is the reference connector component used with ISO 80369-2:2024, Annex C, Figure C.13. respiratory and breathing-system connector projects need the correct R1 or R2 cone/socket reference item before leakage, separation or non-interconnectability work can be planned Confirm the connector side, mating counterpart, interface type, test method and required documents before ordering the item or a matched set.
Start with whether the sample is R1 or R2, cone or socket, and whether the order needs a complete assembly or a component-level insert/body. Select Figure C.13 when the sample under evaluation matches a female mating connector; the reference item supplies the opposite mating side for the specified setup. A frequent purchasing error is confusing an R1 item with an R2 item, or quoting a component when the laboratory actually needs the complete reference connector assembly.
The connector body is a component-level item used with the R2 cone taper insert for the non-axial-load R2 cone reference connector assembly. The image is a standard Figure production specification drawing, not a KingPo product photo. Use it to confirm Figure identity, connector role and assembly/component relationship before requesting controlled manufacturing details.
This reference item is intended for respiratory device development, incoming connector checks, laboratory method planning and supplier qualification for breathing-system small-bore connectors. It provides a known mating interface when planning leakage performance, separation or disconnection by unscrewing, stress-cracking evaluation, non-interconnectable characteristics; it is not a general-purpose connector.
This item belongs to ISO 80369-2:2024, Annex C, Figure C.13. Product type: reference connector component. Gender: male. Connection type: R2 cone body. Related ISO 80369-20 test methods include leakage-pressure-decay, unscrewing-torque, stress-cracking. The standard Figure identifies the reference relationship; KingPo confirms the controlled drawing, documentation and certificate wording for the selected order scope.
Use this item when the test object is a female mating connector and the evaluation concerns leakage performance, separation or disconnection by unscrewing, stress-cracking evaluation, non-interconnectable characteristics. In a complete setup it may work with pressure, force, torque or fixture equipment depending on the method. The Figure item defines the mating reference role; it is not a leakage tester, force tester or torque tester by itself.
The listed gender is male, so the tested sample should be prepared with the opposite mating side. Lock interfaces usually require buyers to state the thread or locking relationship and whether torque-related methods are part of the request. Include the sample drawing or photo when the connector side, thread or slip interface is not obvious.
Depending on the method, the request may also need leakage equipment, axial-load equipment, torque equipment, a connector support fixture or a stress-cracking fixture. For this standard family, the RFQ should emphasize R1/R2 family, cone/socket side, assembly or component scope, method route and whether the counterpart or fixture should be quoted together.
For Figure C.13, the counterpart is a female mating connector. Because this is a component-level Figure item, buyers should state whether they need only the component or the complete reference connector assembly. Include whether the counterpart, storage case, fixture, gauge or test equipment should be quoted together.
Calibration or dimensional verification should be discussed for the selected Figure item, not assumed for the whole product family. Ask for certificate wording, measured features, traceability route and recalibration interval when those details are required for laboratory records or supplier qualification.
Include ISO 80369-2, Figure C.13, tested connector type, required mating side, lock or slip connection, related method (leakage-pressure-decay, unscrewing-torque, stress-cracking), quantity, counterpart need, complete-set need, fixture or equipment need, certificate wording and shipping region. Attach a sample drawing or photo when the connector side or interface is not obvious.
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productYes, but include ISO 80369-2, Figure C.13, a female mating connector, quantity and certificate needs so KingPo can identify the correct item scope.
No. It should be treated as a reference connector or component for leakage performance, separation or disconnection by unscrewing, stress-cracking evaluation, non-interconnectable characteristics. A production connector should not be substituted unless KingPo confirms the function and acceptance basis.
Include ISO 80369-2, Figure C.13, tested connector, required mating side, quantity, certificate requirement, calibration need and any related ISO 80369-20 method such as leakage-pressure-decay, unscrewing-torque, stress-cracking.
Controlled dimensions and tolerances should be confirmed from approved source documents and KingPo engineering data during quotation.
A complete set is more appropriate when the buyer also needs the counterpart, fixture, storage case, gauge, equipment interface or certificate package for Figure C.13.
Confirm the applicable standard, product family and test method, then include the required quantity, fixtures and documents with your inquiry.
Family page for active ISO 80369 reference connector records.
Match ISO 80369-2 Figures with respiratory reference connectors, mating sides, applicable methods and quotation requirements.
Compare ISO 80369-20 Annex B pressure-decay testing with Annex C positive-pressure liquid leakage, including equipment, connectors, fixtures and report requirements.
Method page for luer lock unscrewing workflows, connector assembly fixture selection, reference connector context and torque-route RFQ preparation.
Method page for stress-cracking fixture, connector, conditioning, leakage follow-up and report-input relationships without publishing unconfirmed limits.
