ISO 80369-20 Annex B/C Pressure and Liquid Leakage Tester
KingPo supplied documentation identifies this tester for ISO 80369-20 Annex B pressure leakage and Annex C positive-pressure liquid leakage workflows.
| Documented model scope | ISO80369-20 Annex B and Annex C |
|---|---|
| Applicable Annex | Annex B pressure test and Annex C positive-pressure liquid test |
| Use when | The required ISO 80369-20 method is pressure leakage, pressure decay or positive-pressure liquid leakage |
One equipment family, two clearly separated leakage workflows
KingPo operating material documents pressure-decay air leakage and positive-pressure liquid leakage on this tester family. The selected Annex, test medium, sample connection and result record must be confirmed before quotation.
Choose Annex B for leakage by pressure decay. Choose Annex C when the requirement is positive-pressure liquid leakage. Annex D subatmospheric air leakage uses a separate equipment page and pressure route.
- Connect and secure the sample with the correct reference connector and fixture.
- Select the pressure or liquid workflow and enter the required time, pressure and sample volume.
- For liquid testing, prepare the tank, AIR OUTLET connection, liquid path and valve sequence before starting.
- Run the test, review the pressure curve and retain the required result or printed report.
Documented controls and result fields
- Live pressure, test time and P1 pressure at the test point
- Starting pressure, pressure change, test period and test volume
- Leakage-rate calculation fields and curve display
- Print function for the documented test result workflow
Confirm before quotation
- Annex B pressure decay or Annex C liquid leakage
- Connector sample, mating reference and fixture interface
- Required pressure range, test duration and sample volume
- Report format, operating document and certificate expectations
Equipment specifications and workflow statements on this page are drawn from the supplied KingPo operating manual. Final test conditions and acceptance criteria remain controlled by the applicable standard and approved laboratory procedure.
Key information
| Power supply | 220V 50Hz |
|---|---|
| Test station | 1 station |
| Pressure range | 0-600 kPa |
| Accuracy | +/- 0.25% |
| Test time | 0-9999 s can be set |
| Internal pipe volume note | sample volume + device pipe volume 1.57 cm3 |
| Annex selection note | Annex B and Annex C use the same tester family with different pressure and liquid setups |
| Calculation fields named in KingPo documentation | Leakage rate, lower-limit pressure, starting test pressure, volume to specimen, pressure change and test period |
| Source material | KingPo supplied operating documentation |
What to confirm before ordering
| Standard / Figure | Confirm applicable standard and product family |
|---|---|
| Product type | test equipment |
| Connector family | leakage tester family |
| Information for quotation | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Share the accessory, fixture, certificate and shipping needs so KingPo can identify the right product scope.
Request documents for the exact product configuration
Datasheets, manuals, controlled drawings, report examples, calibration records and certificate wording should match the selected Figure, Annex, fixture, instrument channel and order configuration.
| Product image | Available on this page |
|---|---|
| Technical drawing | Controlled drawing requested when applicable |
| Datasheet | Request for selected product scope |
| Request types | Datasheet request, Configuration checklist request |
| Calibration | Certificate scope discussed for the selected product scope |
| Certificate | Certificate wording confirmed with quotation scope |
How this product fits into the method
Use the test method to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
RFQ context
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productFAQ
Which ISO 80369-20 Annexes are covered by KingPo documentation?
KingPo supplied documentation identifies the product scope as ISO80369-20 Annex B and Annex C.
Can one tester configuration support both Annex B and Annex C?
KingPo documentation describes Annex B pressure leakage and Annex C positive-pressure liquid leakage on the same tester family. The required pressure or liquid setup must still be confirmed for the order.
Are ISO 80369-20 acceptance limits published on this product page?
No. Confirm controlled standard limits and final pass/fail wording against the applicable standard and selected equipment configuration.
Related standards, family, requirements and methods
Confirm the applicable standard, product family and test method, then include the required quantity, fixtures and documents with your inquiry.
ISO 80369 Leakage Test Equipment Family
Family page for pressure decay, air pressure, and related leakage testing equipment structures.
ISO 80369-20
Common test method relationship hub for ISO 80369 performance workflows.
Pressure Decay Leakage Requirement
Illustrative relationship page for pressure decay leakage equipment and product families.
ISO 80369-20 Annex B/C Leakage Method
Compare ISO 80369-20 Annex B pressure-decay testing with Annex C positive-pressure liquid leakage, including equipment, connectors, fixtures and report requirements.